Haldrup CTS-95

Twin Shaker Technology

  • Powerful 6-cylinder engine
  • Robust and stable construction
  • Two completely seperate harvesting, threshing and cleaning systems
  • Separate, weighing systems working in parallel

2 Plots - 1 Operation

The high-performance Double Plot Combine Harvester HALDRUP CTS-95 Twin-Shaker enables you to harvest two plots in one operation. The HALDRUP CTS-95 is equipped with two completely separated harvesting, threshing and cleaning systems in order to ensure mix-free harvesting results of the two plots.

Invest in this powerful Plot Combine Harvester HALDRUP CTS-95 TwinShaker, increase your productivity and save time and money!

Powerful

With the powerful, water-cooled DEUTZ Turbo-Diesel engine  with 160 kW (218 HP), the Twin-Shaker is perfectly equipped for difficult harvesting conditions. Optionally, the hydrostatic 2- speed drive (speed range 0 - 20 km/h) can be executed as four-wheel drive.

The double cereal threshing units are available in three different working widths from 2x 1,25 m to 2x 1,75 m. The hydraulically foldable 2x2 row Geringhoff  corn and sunflower headers are perfectly attuned to the performance of the machine.

Process

The two conventional tangential threshing units with their 640 mm wide threshing channel and a 450 mm threshing drum diameter ensure an efficient threshing performance. The residual grain separation system is carried out by the two straw walker systems, each of them with 3 walkers over 3 steps. The adjustable lamella sieves and the bottom blower are infinitely adjustable from the cabin. Upper and lower sieve are working in opposite directions and, therefore, ensure a higher smoothness of the machine and better weighing results.

Crops are carried pneumatically into the prehopper of the weighing system. The hanging scale is insensitive to vibrations and guarantees for reliable weighing results. The capacity of the prehopper and weighing hopper is 40 liters each. Samples can be taken directly inside the cabin. The spacious cabin of the HALDRUP CTS-95 provides comfort for both driver and operating personnel and also a good view over all operating elements.Crops are carried pneumatically into the prehopper of the weighing system. The hanging scale is insensitive to vibrations and guarantees for reliable weighing results. The capacity of the prehopper and weighing hopper  is 40 liters each. Samples can be taken directly inside the cabin. The spacious cabin of the  HALDRUP CTS-95 provides comfort for both driver and operating personnel and also a good view over all the operating elements.

Options

Additionally, the HALDRUP CTS-95 can also be equipped with a HALDRUP HarvestManager hardware and software, Near-infrared spectroscopy (NIRS) for analysis of value-determining ingredients, hectoliter box, moisture measurement, monitoring system (camera), straw chopper and many other options, and be tailored to your specific needs and requirements.

Cabine for two persons with air-condition
Engine DEUTZ Diesel, water cooled,  160 kW, 218 HP
Fuel tank
465 l
Drive hydrostatic transmission 0 - 20 km/h; four-wheel drive optional
Steering
hydraulic; steering wheel adjustable in height and reclining
Tyres (front) 16.5/85-28 or
340/65 R 18
Tyres (rear)
15.0/55-17 or
19.0/45-17
Track width 2,13 m
Threshing drum
speed: 350 - 1800 Rpm
diameter: 2 x 450 mm
number of rasp bars: 6
Concave
wire distance:
7 mm - 11 mm - 26 mm
concave wrap: 90°
Straw walker
2 x 3 straw walkers
Upper sieve 2 lamella sieves (adjustable), 22 mm - 2 x 0,72 m²
Lower sieve
2 lamella sieves (adjustable), 15 mm - 2 x 0,72 m²
Total sieve area 2 x 1,44 m²
Bottom blower speed
350 - 1100 U/min; adjustable with variator
Cutting table width: 2 x 1,25 m – 2 x 1,50 m – 2 x 1,75 m
Maize header Geringhoff
Rota Disc 2 x 2 rows, hydraulically foldable
Tine cloth pick-up device
2 x 1,25 m – 2 x 1,50 m – 2 x 1,75 m
Options HALDRUP HarvestManager
HALDRUP HarvestMaster
NIRS
hectoliter box
moisture measurement
monitoring system (camera)
sunflower harvester
corn harvester
Grain tank 7.000 l (unfolded)
Balance
2 pre-hoppers, 2 weighing hoppers (volumen 45 l each)
Mettler IND 425 with 3 bending weighing cells
Dimensions: length x width x height from 8.50 m x 2.55 m x 3.30 m
Weight 7.100 kg without threshing unit
8.600 kg with grain cutting unit
9.000 kg with corn harvester
Back